 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
PLEASE NOTE: INSTALLING ANY RAYLAR EQUIPMENT MAY VOID YOUR FACTORY WARRANTY.
Raylar Inc.'s "Cool
Gap" manifold is engineered to maximize the horsepower and torque
levels of the 496-8.1 engine in high performance use with our "BigPower"
aluminum cylinder heads and camshafts. The stock manifold was designed
for low RPM and emissions use, and even with expensive modifications cannot
meet the higher air flow demands of this engine in performance use. The
"Cool Gap" manifold is the best answer to the 496-8.1 engine's
intake manifold breathing problems. This new manifold incorporates long
high velocity runners to provide excellent low and mid range torque levels
and a large volume plenum to satisfy this engine's demand for more air
at higher RPM's.
The "Cool Gap" manifold gets its name from two air gaps: one
between the engine lifter valley and the manifold runners and one between
the runners and the plenum. These keep the incoming air fuel mixtures
cool and dense, additionally producing more power and torque over the
entire RPM band.
The "Cool Gap" also features a design that allows it to bolt
on in the same space as the stock manifold, and accepts all standard fittings,
sensors, brackets, injectors, fuel rails, and accessories without additional
modifications to the engine or its wiring.
This manifold is more of Raylar Inc.'s "keep it simple engineering"
designed to make our products simple to install, lower in cost and easier
for our customers to take advantage of the added power and torque of this
engine.
Keep "Cool"--Get the Raylar Inc. "Cool Gap" manifold
and enjoy the added power of your engine today.
